Enantat 400 for sale from Dragon Pharma is Testosterone Enanthate, supplied as a 10 ml vial (400 mg/ml). It is the same ester as Enantat 250 at a higher concentration, for anyone who needs a large weekly dose in a smaller volume.
It is in stock now and ships the same or next working day from our US domestic and international warehouses, in discreet packaging, and the batch can be verified against its laboratory report on request. The sections below cover what Testosterone Enanthate is used for, how it is dosed, where it fits into a cycle and what to watch for.
Enantat 400 Product Details
Enantat 400 is supplied as a 10 ml vial (400 mg/ml). It is for intramuscular injection only. Its half-life is approximately 7 days, and it aromatises, so an aromatase inhibitor is usually kept on hand.
What Testosterone Enanthate Is Used For
Enantat 400 is supplied as a 10 ml vial (400 mg/ml). Testosterone enanthate is an injectable ester of testosterone, near enough interchangeable with cypionate and the ester most cycle literature is written around. It is used as a cycle base for mass, strength and libido, and for testosterone replacement in the same way as cypionate.
Stacking Enantat 400 in a Cycle
It sits under almost every stack, from trenbolone and deca to the oral kickstarts.
Side Effects & Cautions
Enantat 400 is supplied as a 10 ml vial (400 mg/ml), and the cautions below apply at that strength. It aromatises and suppresses natural production, so an AI is kept on hand and a PCT follows the cycle.
Batch-Tested & Verified Lab Results
Every batch of Enantat 400 that reaches PandaRoids is checked before it is listed. The vial you receive carries a batch number, and the corresponding laboratory report shows the measured content against the label claim. If you want the report for the batch you were sent, ask us and we will send it. That is the difference between a listing that says lab tested and one that can show you the numbers.
Enantat 400 Dosage & Usage Guidelines
Enantat 400 is for intramuscular injection only. Replacement dosing is 100 to 200 mg a week; cycle dosing is 400 to 600 mg a week, given as two injections a week. Build the dose up rather than starting at the top of the range.
Shipping & Product Authenticity
Enantat 400 ships from our US domestic warehouse for US orders and from our international warehouse for the rest, in discreet packaging with no product description on the outside. It arrives in its original Dragon Pharma packaging and is sealed. Shipping is tracked, and if anything is wrong with what arrives we replace it.
Storage
Enantat 400 keeps its potency best when it is stored properly. Store at controlled room temperature, between 15 and 25 C, protected from heat, moisture and direct light. Do not freeze the vial, because freezing can separate the solution. Before each draw, check that the vial is clear and free of particles, and swab the stopper before inserting the needle.
What is Enantat 400 and how much testosterone is in one vial?
Enantat 400 is testosterone enanthate at 400 mg/mL in a 10 mL vial, so 4,000 mg of labelled ester. The enanthate ester is roughly 70 per cent testosterone by weight and the rest is the ester chain that controls release, which works out at about 280 mg of active hormone per millilitre, near 2,800 mg in the vial. The label states ester weight, not free testosterone, so 400 mg of enanthate carries slightly less active hormone than 400 mg of a short ester like propionate.
Why does Enantat 400 hurt more than Enantat 250?
Concentration. There is 60 per cent more hormone in every millilitre, and the solvent needed to hold it in solution is what most people feel. A small volume of a strong solution irritates muscle more than a larger volume of a weaker one, and at this strength the depot can crystallise slightly where it is injected. Warming the vial in your hands for a minute before drawing, injecting slowly, splitting the volume across two sites and rotating sites all reduce it. Pain that is hot, spreading, or still there after a week is not normal soreness.
How much Enantat 400 should I inject per week?
At 400 mg/mL the arithmetic is simple: 1 mL is 400 mg, 0.5 mL is 200 mg, 0.25 mL is 100 mg. Genuine replacement is 100 to 200 mg, so 0.25 to 0.5 mL a week. A first cycle is 300 to 500 mg, which is 0.75 to 1.25 mL. Intermediate and advanced cycles run 600 to 800 mg and beyond, and that is where the concentration earns its price: 800 mg is 2 mL here against 3.2 mL of a 250 mg/mL product.
How often should I inject Enantat 400?
Twice a week for anything above replacement. The enanthate ester has a half-life of about a week, so one weekly injection works, but it gives a peak a day or two after the shot and a trough before the next one. Monday and Thursday split that. At this concentration the split is easy, because both doses are small: half a millilitre in each is 400 mg a week, which will pass through a 27 gauge needle in most shoulders.
How quickly does Enantat 400 work?
Two timelines, and confusing them is the usual mistake. Libido, mood, energy and sleep change within one to two weeks, because they respond to the hormone level rather than to tissue. Strength, pumps and visible size take four to six weeks, and blood levels are not steady until roughly five half-lives, so about five weeks. Judging it at week three is judging the ramp. The first signs most people notice are better morning erections, faster recovery between sessions and a fuller look across the shoulders.
Should I choose Enantat 400 or Enantat 250?
The ester is identical, so the only question is volume against comfort. Take the 400 if your weekly dose is 600 mg or more: 800 mg is 2 mL instead of 3.2 mL, fewer millilitres, fewer sites, less oil. Take the 250 if you are running replacement doses, if this is your first cycle, or if you know you are sensitive to injection pain, because the lower concentration is gentler on tissue and easier to measure accurately at quarter-millilitre doses. Our Enantat 250 page covers that version in full.
Do I need an AI, and when do I start a PCT?
At 350 to 500 mg a week, most people need either a low dose aromatase inhibitor or bloodwork at week six to decide: oestradiol, haematocrit, lipids and blood pressure. The propionate makes oestrogen rise sooner after each injection than a long ester would, so early bloodwork is more useful here than usual. For recovery, the cypionate and enanthate are the slow components, so wait two weeks after your last injection before starting a SERM, then run it for four weeks.
How should I store Enantat 400?
Upright at room temperature, ideally 20 to 25 C, in its box and out of direct light. Do not refrigerate or freeze it. A 400 mg/mL solution sits close to its solubility limit, so cold is exactly what makes it turn cloudy or throw crystals; if that happens, roll the vial between your palms or stand it in warm water until it clears, and never inject it while it is cloudy. Swab the stopper before every draw and use the vial within about two months of the first puncture.
Where can I buy Enantat 400?
It ships the same or next working day from our US domestic warehouse for US orders and from our international warehouse for the rest, in discreet packaging with nothing on the outside describing the contents. It arrives sealed in its original Dragon Pharma box, shipping is tracked, and if your order has not arrived 35 days after shipping we resend it free.
August 19, 2022
Dragon Pharma Test E and Axio Labs Ssutaplex. Both of these are huge in my AAS cycles